Providing Quality Engineered Solutions Since 1907
Bunting Bearings 1907-2007 100 Years
ISO 9001 Certified
All Categories > Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar > Continuous Cast Solid Bars > C93700 (SAE 64) Bronze Bars > Item # B937S000064  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # B937S000064, C93700 (SAE 64) Continuous Cast Bronze Solid Bars


Bronze Bars

larger image
High-Leaded Tin Bronze
CDA 937
SAE 64 83-10-10
ASTM B505

Bunting continuous cast bronze bars of C93700 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 78.00 – 82.00%
Tin: 9.00 – 11.00%
Lead: 8.00 – 11.00%

Physical Properties: Continuous Cast
Tensile Strength, PSI: 35,000 min.
Yield Strength, PSI: 20,000 min.
Elongation: 6% min.
Brinell Hardness (500 kg load): 60 typical
Machinability Rating 80
Minimum Operating Temperature -450°F
Maximum Operating Temperature 500°F

C93700 has higher tin and lead than C93200 and is used in bearings with higher speeds and loads. It has increased corrosion and oxidation resistance, with good anti-frictional properties, good load-carrying ability and excellent machinability. C93700 can be used in applications where lubrication may be low or interrupted.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.




 Specifications   

Stock Item?1
Yes

Nominal Size I.D.
SOLID

Nominal Size O.D.
8 in

O.D. Min
8.0780 in

O.D. Max
8.1100 in

Min. Temperature
-450 ºF

Max. Temperature
500 ºF

P Value (Max.)
4000

V Value (Max.)
1000

PV Value (Max.)
85000
1 Minimum quantities may apply to non-stock items, please contact customer service for more information.