Providing Quality Engineered Solutions Since 1907
Bunting Bearings 1907-2007 100 Years
ISO 9001 Certified
All Categories > Continuous Cast Solid, Cored, Wearplate and Centrifugal Cast Bronze Bar > Continuous Cast Solid Bars > C90700 (SAE 65) Bronze Bars > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

C90700 (SAE 65) Bronze Bars

 
Check up to five results to perform an action.

Bronze Bars

larger image
C90700 is a “GREEN” non-leaded alloy
Tin Bronze
CDA 907
SAE 65 89-11
ASTM B505

Bunting continuous cast bronze bars of C90700 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid bars are stocked in 13" increments and 105" lengths, and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)
Copper: 88.00 – 90.00%
Tin: 10.00 – 12.00%
Lead: 0.50% max.
Zinc: 0.50% max.
Physical Properties: Continuous Cast
Tensile Strength PSI: 40,000 min.
Yield Strength PSI: 25,000 min.
Elongation: 10% min.
Brinell Hardness (500 kg load): 100 typical
Machinability Rating: 20
Minimum Operating Temperature: -450°F
Maximum Operating Temperature: 550°F

C90700 is used for bearings and gears where higher strength and load-carrying ability is required. C90700 has good wear resistance but should be used with hardened steel shafts (300-400 HB). Due to the lack of lead, this material requires constant lubrication, generally grease.

WARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.



Compare Items
   
  Results 1 - 12 of 12 1 

Item #

Stock
Item?

Nom
Size I.D.

Nom
Size O.D.

O.D. Min

O.D. Max
B907S000008 Yes SOLID 1 in 1.0310 in 1.0410 in
B907S000012 No SOLID 1 1/2 in 1.5310 in 1.5410 in
B907S000016 Yes SOLID 2 in 2.0340 in 2.0440 in
B907S000020 No SOLID 2 1/2 in 2.5340 in 2.5440 in
B907S000024 Yes SOLID 3 in 3.0340 in 3.0440 in
B907S000028 No SOLID 3 1/2 in 3.5340 in 3.5440 in
B907S000032 Yes SOLID 4 in 4.0550 in 4.0710 in
B907S000036 No SOLID 4 1/2 in 4.5550 in 4.5710 in
B907S000040 Yes SOLID 5 in 5.0550 in 5.0710 in
B907S000048 Yes SOLID 6 in 6.0780 in 6.1100 in
B907S000064 Yes SOLID 8 in 8.0780 in 8.1100 in
B907S000080 Yes SOLID 10 in 10.0780 in 10.1340 in
  Results 1 - 12 of 12 1